Blaser attachment mount for the Liemke Merlin series.The new Blaser attachment mount for the Blaser 1-7x28 iC riflescope and the Merlin 13, Merlin 35,  Merlin 42 or Lux 1Due to the automatic positioning and alignment of the attachment mount using the inner rail of the Blaser 1-7x28 iC, repeatable mounting, even in complete darkness, is always given. By closing a clamping lever, the attachment mount is additionally friction-locked to the objective. This ensures maximum repeatability even with very frequent mounting and dismounting of the thermal imaging attachment. With its ideal magnification range for hunting wild boar, the Blaser 1-7x28 iC riflescope thus becomes the new universal genius, which can show its strengths to the full not only in driven hunts and daytime stalking, but also in night hunting for sows.Thanks to a recoil stud that can be uniquely mounted in the inner rail of the Blaser 1-7x28 iC riflescope, in which a solid crossbar engages, the constant positioning of the thermal sight and its positive connection is guaranteed. By closing the clamping lever, the attachment is additionally locked onto the objective with a force fit. This ensures maximum repeatability even when the thermal imaging attachment is mounted and removed very frequently.More information on the Blaser riflescope can be found at Blaser.com.NoteAccording to current federal law changes, the mechanical adaptation of multifunctional attachment optics on firearms is allowed. Thus, a multifunctional attachment optic with adapted weapon mount is NOT a prohibited item. The item can therefore be freely acquired/carried by holders of a valid hunting license. The use as a holder of a valid hunting license on shooting ranges, e.g. for the purpose of adjustment, is permitted.Use in the context of hunting is subject to the hunting regulations of the respective federal state.Translated with www.DeepL.com/Translator (free version)

LIEMKE Clamping adapter KA-MCThe LIEMKE clamping adapter KA MC has been specially developed for the use of thermal imaging attachments on day optics.The clamping adapter has a very low profile and allows precise and stable clamping of attachments to day optics.The wide clamping surface provides an extra stable hold on the day optics and an additional rubber coating in the inner flange protects the front of the outer tube from damage and unsightly scratches.The clamping adapter KA MC is available in sizes from 48 - 65 mm. The size describes the outside objective diameter of your scope.NoteAccording to current federal law changes, the mechanical adaptation of multifunctional attachment optics on firearms is allowed. Thus, a multifunctional attachment optic with adapted weapon mount is NOT a prohibited item. The item can therefore be freely acquired/carried by holders of a valid hunting license. The use as a holder of a valid hunting license on shooting ranges, e.g. for the purpose of adjustment, is permitted.Use in the context of hunting is subject to the hunting regulations of the respective federal state.

MERLIN-42 adapter for multifunction mount Gen2 This adapter allows the adaptation of the MERLIN-42 optics to the multifunction mount LK-S Gen2

Multifunction mount LK-S Gen2 The multifunction mount LK-S Gen2 allows the adaptation of the MERLIN-42 optics in front of the Steiner optics type T332. The adapter shoe suitable for MERLIN-42 is included in the scope of delivery. The Steiner optics are not included in the scope of delivery. Thermal imaging attachment Merlin 42 in practice

Multifunction mount Gen2 Picatinny MERLIN-35   The LK-S Gen2 multifunctional mount for the LIEMKE MERLIN-35 enables a fast and repeatable mounting of the MERLIN-35 thermal imaging front attachment in front of the Steiner T332 sight.The LK-S Gen2 multifunctional mount for the LIEMKE MERLIN-35 is extremely easy to use. It can be mounted repeatedly and easily onto the rifle by means of quick-release clamps, without the use of any additional tools. Exchanging the two optics on the Picatinny rail can thus be accomplished within a matter of seconds.  

LIEMKE Picatinny Montage für MERLIN-35   The Picatinny mount for the LIEMKE MERLIN-35 enables a fast and highly repeatable attachment of the MERLIN-35 thermal pre-mounted device onto a Picatinny rail. The Picatinny mount for the LIEMKE MERLIN-35 is very easy to use. It can be mounted repeatedly and easily onto the rifle by means of a lockable clamping lever, without the use of any additional tools. Exchanging optics on the Picatinny rail can thus be accomplished within a matter of seconds.The distance from the upper surface of the Picatinny rail to the optical axis is 35mm, which is perfectly suitable for the Liemke ZO 3x20. The minimum length of the Picatinny rail required to combine the MERLIN-35 thermal imaging front attachment and the Liemke ZO 3x20 sight is 160 mm.

LIEMKE Rifle Mount Long   With the LIEMKE Rifle Mount Long, model E, you can mount any of the SPERBER, BUSSARD and MILAN multi-functional thermal spotters onto a Sauer 303. Important: The mount fits only those Sauer 303 models with serial numbers beginning with "R".  The LIEMKE Rifle Mount Long is very easy to use. It can be mounted repeatedly and easily onto the rifle without the use of any additional tools. Exchanging optics on the Sauer 303 can thus be accomplished within a matter of seconds. The Liemke Rifle Mount Long also convinces with its low profile and extremely rugged design. Note It is important to observe legal regulations and federal laws in your respective country. In some countries, a pre-mounted device combined with a weapon mount is not a prohibited object. In such cases, it can usually be freely purchased and carried by holders of valid hunting licenses, and even used on shooting ranges, e.g. for the purpose of zeroing the scope. When used for hunting purposes, the hunting regulations of your respective country will apply.